Chemical Resistant Gloves
Chemical Resistant Gloves
Gloves designed to resist a wide range of chemicals; available in butyl, neoprene, nitrile, PVC, natural rubber, fluoroelastomer, and specialty formulations, lined/unlined, smooth/textured finish; ambidextrous, available in variety of sizes and thicknesses. Regulatory compliance details can be obtained at the individual product level.
The U.S. Occupational Health and Safety Administration (OSHA) standards for personal protective equipment (PPE) address the need for chemical protective safety gloves. PPE is required when hands are exposed to possible skin absorption of harmful substances or chemical or thermal burns.
The OSHA standard also mandates an assessment of chemical exposure and the choice of appropriate gloves based on:
- Dexterity demands
- Length of exposure
- Chemical concentration, temperature, and combinations
- Simultaneous hazards
What Are Chemical Resistant Gloves Used for?
Use chemical resistant gloves for work in chemical plants, transportation, chemical processing, petrochemical and oil refining, de-greasing, solvents, hazardous liquids, and janitorial and maintenance work.
Chemical resistant glove materials and possible applications include:
- Butyl ‒ high-permeation resistance to gas and water vapors; use with esters and ketones
- Neoprene ‒ excellent tensile strength and heat resistance; compatible with some acids and caustics; moderate abrasion resistance
- Nitrile ‒ chemical and abrasion resistance; for general-duty gloves; protects against oils, greases, petroleum products, some acids, and caustics
- PVC (polyvinyl chloride) ‒ resists most acids, fats, petroleum hydrocarbons; abrasion resistant
- PVA™ material (polyvinyl alcohol) ‒ water-soluble; gas-impermeable; resists aromatic and chlorinated solvents
- Viton™ material ‒ resists chlorinated and aromatic solvents; flexible; minimally resists cuts or abrasions
What Are the Best Chemical Resistant Gloves?
No single glove meets the PPE needs for all chemical exposures. Use the manufacturer’s test results to help select the right gloves and check ratings.
Some chemical resistant gloves come lined with cotton for comfort and have other special features. In addition to hand protection, eye protection is important as well. Make sure your facility is equipped with chemical splash goggles, faceshields, eye protection safety signage, and other PPE.
- (114)
- (10)
- (4)
- (78)
- (2)
- (24)
- (1)
- (2)
- (2)
- (17)
- (14)
- (1)
- (6)
- (92)
- (24)
- (6)
- (112)
- (18)
- (6)
- (122)
- (11)
- (6)
- (36)
- (31)
- (36)
- (32)
- (10)
- (1)
- (4)
- (1)
- (125)
- (220)
- (5)
- (34)
- (238)
- (6)
- (12)
- (26)
- (13)
- (1)
- (20)
- (23)
- (4)
- (21)
- (27)
- (7)
- (5)
- (1)
- (31)
- (3)
- (1)
- (6)
- (4)
- (2)
- (6)
- (28)
- (18)
- (62)
- (3)
- (2)
- (307)
- (8)
- (6)
- (2)
- (1)
- (15)
- (2)
- (7)
- (33)
- (8)
- (4)
- (9)
- (21)
- (3)
- (9)
- (1)
- (11)
- (1)
- (1)
- (21)
- (1)
- (6)
- (23)
- (13)
- (14)
- (5)
- (4)
- (18)
- (14)
- (6)
- (6)
- (35)
- (9)
- (3)
- (5)
- (11)
- (9)
- (2)
- (20)
- (61)
- (1)
- (26)
- (2)
- (2)
- (15)
- (4)
- (1)
- (2)
- (4)
- (5)
- (6)
- (8)
- (5)
- (4)
- (5)
- (6)
- (4)
- (3)
- (6)
- (3)
- (5)
- (1)
- (24)
- (4)
- (1)
- (5)
- (9)
- (3)
- (10)
- (4)
- (2)
- (5)
- (10)
- (8)
- (3)
- (3)
- (1)
- (1)
- (5)
- (4)
- (5)
- (75)
- (338)
Filtered Search Results
Uvex™ Rubiflex S NB80S Chemical Protection Gloves
Cotton interlock supporting material, along with NBR exterior, makes these gloves suitable for applications that require protection against chemicals and mechanical hazards.
Series | Rubiflex S NB80S |
---|---|
EN ISO 374-1 | Type B |
EN ISO 374-1 CHEMICAL LETTER CODES | JKOPT |
Length (Metric) | 80 cm |
Coating Material | NBR |
EN388 Standard | 2121X |
Color | Green |
Liner Material | Interlock Cotton |
Glove Cuff Style | Gauntlet |
Honeywell KCL™ Dermatril™ L 741
Honeywell KCL™ Dermatril™ L 741 is a disposable, chemically resistant, long form nitrile glove that provides hand and lower arm protection.
Thickness (Metric) | 0.11 mm |
---|---|
Certifications/Compliance (Europe) | EC Category PPE 3, EN374, EU 1935/2004, EN 455, 93/42/EWG |
Length (Metric) | 270 to 280 mm |
Color | Blue |
Material | Nitrile |
Powdered | Powder Free |
Certifications/Compliance | ASTM 1671 2007 |
SHOWA™ 890 Unlined Viton™ Chemical Resistant Butyl Gloves
Extra-thick 14 in. chemical resistant gloves provide resistance to highly corrosive acids. Butyl rubber coating is designed for handling aliphatic and aromatic hydrocarbons, such as Benzene, Toulene, and Xylene.
Grip Design | Smooth |
---|---|
Length (Metric) | 35.5 cm |
EN388 Standard | EN 388:1020X |
Color | Black |
Length (English) | 14 in. |
Material | Viton,Butyl |
Thickness (Metric) | 0.71 mm |
EN ISO 374-1 | Type B |
Certifications/Compliance (Europe) | Cat III CE 0299 |
EN ISO 374-1 CHEMICAL LETTER CODES | DFL |
Thickness (English) | 28 mil |
Latex Free | Yes |
Lining | Unlined |
Glove Cuff Style | Rolled |
Honeywell KCL™ Dermatril™ P 743 Gloves
Honeywell KCL™ Dermatril™ P 743 Gloves feature chemical and mechanical resistance and are approved for food processing.
Thickness (Metric) | 0.2 mm |
---|---|
Certifications/Compliance (Europe) | Approved for food processing according to EU 1935/2004. EC Category PSA 3 |
Length (Metric) | 270 to 290 mm |
Color | Blue |
Quantity | 50/Pk |
Latex Free | Yes |
Resistant To | Variety of cytotoxic agents, virus-resistant to ASTM F1671: 2007 |
Material | Nitrile |
Powdered | Powder Free |
Certifications/Compliance | ASTM 1671:2007 |
Ansell TouchNTuff™ 92-600 Disposable Chemical Resistant Nitrile Gloves
Soft nitrile disposable gloves provide high levels of comfort and splash resistance against hazardous chemicals.
Disposable | Single-use |
---|---|
Chlorinated | No |
Length (Metric) | 24 cm |
EN 421 | No |
Finger Thickness (English) | 5.5 mil |
Color | Green |
Length (English) | 9.5 in. |
Material | Nitrile |
Hand | Ambidextrous |
Finger Thickness (Metric) | 0.14 mm |
Thickness (Metric) | 0.14 mm |
Series | TouchNTuff™ 92-600 |
EN ISO 374-1 | Type B |
Certifications/Compliance (Europe) | Category III, EN 420:2003 + A1:2009 |
EN ISO 374-1 CHEMICAL LETTER CODES | JKPT |
EN ISO 374 - 5 | Bacteria, Fungi WITH Virus Protection |
Thickness (English) | 5.5 mil |
Palm Thickness (English) | 4.7 mil |
Latex Free | Yes |
Lining | Unlined |
Certifications/Compliance | ASTM D6319,FDA 21 CFR 177.2600,ASTM F1671 |
Manufacturing/QMS Audit Standards | ISO 9001 |
Glove Cuff Style | Beaded/Rolled |
Palm Thickness (Metric) | 0.12 mm |
Ansell™ Microflex™ 93-260 Chemical-Resistant Disposable Glove
Provides thin yet tough chemical protection with unparalleled comfort. Microflex™ 93-260 Disposable Gloves have a solvent resistant exterior, an acid and base resistant middle layer and an easy donning interior layer.
Tensile Strength | 22 MPa |
---|---|
Disposable | Single-use |
Finger Style | Textured |
Length (Metric) | 300 mm |
Packaging Type | Dispenser box |
Color | Green,Blue |
Quantity | 50Pack |
Resistant To | Harsh chemicals including acids, solvents and bases |
Material | Nitrile,Neoprene |
Powdered | Powder Free |
Hand | Ambidextrous |
Thickness (Metric) | 0.198 mm |
Product Type | Disposable Gloves |
Model | 93-260 |
Certifications/Compliance | ASTM D3577, TYPE II, PPE 89/686, EN 420, 388 & 374 CATEGORY III |
Glove Cuff Style | Beaded, Elongated |
Puncture Rating | 0.65 AQL |
Ansell™ NeoTouch™ 25-101 Series Bright Green Neoprene Gloves
With a latex-free formulation, NeoTouch™ gloves are appropriate for the prevention of Type I allergies. Because they’re powder-free, they also limit the risk of dermatitis for the wearer. They provide excellent resistance to acids, bases and alcohols.
Thickness (Metric) | 0.13 mm |
---|---|
Laboratory/Cleanroom Use | Yes |
Series | 25-101 |
Product Type | Gloves |
Color | Green |
Style | 25-101 |
Resistant To | Acids, bases and alcohols |
Material | Neoprene |
Liner Material | Polymer |
Glove Cuff Style | Beaded/Rolled |
Ansell™ VersaTouch™ 37-501 Series Blue Nitrile Immersion Gloves
Resists many solvents and oil based chemicals. Ansell™ VersaTouch™ 37-501 Series Blue Nitrile Immersion Gloves have good abrasion resistance.
Thickness (Metric) | 0.42 mm |
---|---|
Series | 37-501 |
Glove Cuff Style | Gauntlet |
Ansell™ DermaShield™ 73-711 Series Green Neoprene Gloves
SureTRACE
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
Most technically advanced sterile glove available today. Free of latex proteins and accelerators, it minimizes both Type I and Type IV allergies associated with natural rubber.
Thickness (Metric) | 0.175 mm |
---|---|
Series | 73-711 |
Color | Green |
Quantity | 200/CS |
Resistant To | Chemical resistance |
Material | Neoprene |
Powdered | Powder Free |
Glove Cuff Style | Beaded/Rolled |
Sterility | Sterile |
Ansell™ TouchNTuff™ 83-300 Gloves
SureTRACE
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
Ansell™ TouchNTuff™ 83-300 is an ultra-soft polyisoprene glove that offers the performance of natural rubber latex without the risk of latex sensitization.
Description | Smooth external glove surface |
---|---|
EN 421 | Yes |
Length (Metric) Cuff | 295 mm |
Packaging Type | Polybag |
Color | White |
Quantity | 20 pairs |
Material | Polyisoprene |
Thickness (Metric) | 0.17 mm |
Length (English) Cuff | 11.6 in. |
EN ISO 374-1 | Type B |
EN ISO 374-1 CHEMICAL LETTER CODES | KPT |
Product Type | Disposable Gloves |
EN ISO 374 - 5 | Yes |
Thickness (English) | 0.25 mil |
Certifications/Compliance | ASTM D2577, CE Marked CE0493 |
Glove Cuff Style | Beaded |
Ansell™ ChemTek™ 38-520 Series Butyl Polymer Immersion Gloves
Provides the best resistance to the most aggressive chemicals without compromising dexterity or comfort. ChemTekTM gloves are surprisingly flexible and provide excellent dexterity.
Inspected for Medical Use | Yes |
---|---|
Packaging Type | Individually wrapped bags with insert |
Coating Material | Butyl Polymer |
Quantity | 1 Pair |
Resistant To | Highly chemical resistance |
Cuff Material | Butyl |
Hem Color | Black |
Glove Cuff Color | Black |
Series | 38-520 |
Product Type | Immersion Gloves |
Back Material | Butyl |
Thickness (English) | 20 mil |
Style | 38-520 |
Latex Free | Yes |
Glove Cuff Style | Beaded/Rolled |
Honeywell Safety Products™ Powercoat™ 950-020 Neofit Glove
Chemically resistant, flexible and comfortable neoprene-dipped, polypropylene gloves. Honeywell Safety Products™ Powercoat™ 950-020 Neofit Glove have a flocked cotton interior, a large cuff, and a diamond-patterned exterior finish for improved grip.
Tear Rating | 1 |
---|---|
Length (Metric) | 33 cm |
Coating Material | Neoprene |
Color | Black |
Cut Resistance Rating | 1 |
Quantity | 10Pair/PK |
Resistant To | Chemicals, Mechanical Stress |
Material | Neoprene,Polypropylene,Cotton |
Coated Area | Exterior |
For Use With (Application) | Agriculture, Automotive, Building, Construction, Chemical, Industrial Cleaning, Maintenance, Petrochemical, Water Treatment and Wood industries. |
Thickness (Metric) | 0.72 mm |
Product Type | Gloves |
Classification | Dexterity: 5 |
Model | 950 |
Lining | Lined |
Exterior Finish | Diamond |
Certifications/Compliance | CE CATEGORY III Irreversible risks, EN 420-2003 EEC Basic standard, EN 388-2003 Mechanical risks, EN 374-2003 Chemical risks, EC Category PPE 3, EC Certificate Number 0075/797/162/12/08/0487, EC Attestation Number 0075/797/162/12/08/0487 |
Liner Material | Cotton flock |
Puncture Rating | 0 |
Uvex™ Rubiflex S NB40S Chemical Protection Gloves
Cotton interlock supporting material, along with NBR exterior, makes these gloves suitable for applications that require protection against chemicals and mechanical hazards.
Thickness (Metric) | 0.50 mm |
---|---|
Series | Rubiflex S NB40S |
EN ISO 374-1 | Type A |
EN ISO 374-1 CHEMICAL LETTER CODES | JKNOPT |
Length (Metric) | 40 cm |
Coating Material | NBR |
EN388 Standard | 2121X |
Color | Green |
Liner Material | Interlock Cotton |
Glove Cuff Style | Gauntlet |
Honeywell KCL™ Dermatril™ 740 Gloves
Honeywell KCL™ Dermatril™ 740 Gloves are a disposable, chemically resistant nitrile glove.
Thickness (Metric) | 0.11 mm |
---|---|
Certifications/Compliance (Europe) | EC Category PPE 3, EN374, EU 1935/2004, EN 455, 93/42/EWG |
Length (Metric) | 240 to 260 mm |
Color | Blue |
Material | Nitrile |
Powdered | Powder Free |
Certifications/Compliance | ASTM 1671 2007 |
Uvex™ NK4025B NBR-Coated Chemical Protection Gloves
Gloves are constructed with multiple layers of structured material to provide reliable cut protection, as well as resistance against chemical and mechanical hazards.
Series | Protector Chemical NK4025B |
---|---|
EN ISO 374-1 | Type A |
EN ISO 374-1 CHEMICAL LETTER CODES | JKNOPT |
Length (Metric) | 40 cm |
Coating Material | NBR |
EN388 Standard | 4X44C |
Color | Blue |
Material | HPPE,Polyamide |
Liner Material | Interlock Cotton |
For Use With (Application) | Handling wet, oily materials |
Glove Cuff Style | Gauntlet |